Avec toi, cheri, la vie est belle

I haven't talked about music for a while. I'm listening to so much great stuff right now that it would take too long to discuss it all, so let me just touch on one CD that I can't get enough of:

Amadou & Mariam's new one, Welcome to Mali. This duo met in a school for the blind. Their music is mostly in French, has a great world beat sound. I just LOVE this CD. I've listened to it at least twice per day since I got it on Tuesday. My favorite song, and the reason I was compelled to buy it, is the first track, Sabali. It starts out sounding like an old French song, something from the era of Edith Piaf or something, except the words she's singing at this point aren't actually French, then a synthy beat picks up, and a refrain of "Sabali, sabali, sabali" and some other African words. It isn't until more than 1:30 in that the French lyrics that I can understand start. They go:

Cheri je m'addresse a toi (Dear, I'm talking to you)
Avec toi cheri la vie est belle (With you, dear, life is beautiful)

Avec toi cheri (with you, dear)
C'est si bon, la vie (it's so beautiful, life)

Cheri je te fais un gros bisou (dear, I give you a huge kiss)
Je t'embrasse fort (I "hug" you firmly)

And there's lots of lalalalalas and ooo ooo ooos. It's just great.

The weather this weekend is GORGEOUS. I'm going to go listen to this outside now.

Let's make something! Part 4--dividing for the sleeves

Thanks mostly to the bus ride to and from the game, I managed to finish all the increase rows last night. Woo hoo! I was afraid this day would never come. Toward the end of the increase section, it was taking me 20 min/row--that's 20 focused minutes. Not gabbing with Tracie while sort of watching baseball (which would explain why I only finished 4 rows during the game). Now that I've taken the sleeves off, I'm knitting roughly 200 fewer stitches per row, so things should go a bit quicker.

But how did I take the sleeves off, you ask? This picture shows what the knitting looked like after the last row of the increase section (ended with a WS row).

If you look hard, you can see my 4 stitch markers--lower right, upper right, upper left, lower left. Contained within each pair (right sided pair, left sided pair) are the stitches that will become each sleeve. And now I finally get to put these stitches on hold to knit just the body. So, you knit along what will become the left front of the sweater until you get to the first stitch maker:

Remove the maker, then take a darning needle and some random yarn and thread the yarn through the stitches that were after the 1st stitch maker. Thread all the stitches on to the yarn until you get to the second stitch marker:

It would have been more illustrative if I'd chosen random scrap yarn that wasn't nearly the same color as my working yarn, but this stuff was right next to me, and you know, laziness wins. So you see all those stitches inbetween the 2 needle points--those are the stitches that will become the left sleeve, but for a while, they're going to chill on that piece of yarn. I like to tie the 2 ends of the scrap yarn into a little knot, just to be extra sure those sleeve stitches stay put (yeah, learned to do this after an unfortunate event). Now it's time to join the left front (stuff in the far right of the above picture) with the stitches that belong to the back (stuff in the far left of the above picture). The pattern calls for casting on 2 underarm stitches before knitting the stitches that belong to the back. To do this, I use the backward thumb method (does this have a more official name? I don't know), basically you make a little loop of yarn around your left thumb and slide it into the needle in your right hand:

(You like that nail polish? It's super dark raisin-y purple, almost black. Makes me very happy.) Pull this loop nice and tight, then knit the stitches that belong to the back (they used to be after the 2nd stitch marker). Repeat the above steps to put the stitches between the 3rd and 4th stitch makers on another piece of waste yarn, then knit the stitches that will become the right front. This is what it should look like:

The future left sleeve is exiting the frame on the left, and the future right sleeve is exiting the frame on the right. Now the pattern says to knit the body plain for 10 inches or until desired length. So it might be a while before I have more to say about this project. But I must say, being able to separate the sleeves made me feel like I'm making real progress with this--kind of renewed my knitting mojo with this project. Now I'm going to go try on what I have so far (one of the good things about knitting top down reglans)--I want to make sure I have a good number of stitches for the sleeves before I do a ton of knitting on the body then hate it and have to frog a whole bunch. I plan on being able to wear this to Tracie's graduation on 6/9--so I can't lose my mojo again.

The cheating continues

I've knit on the blue cardi for a couple of hours since the last pics, but the change would be noticeable (is that really how you spell that???) to no one, so let's not dwell on that. I would have done more, but instead...

I pieced the backing to go with that quilt top. I wanted the back to be interesting, but not more so than the front, and I this about does it.

And I made this summery top, per this tutorial on Sew Mama Sew. Of course, I made the mistake of choosing fabric that is not quite opaque. I think I'm going to tinker a bit more with the fit--the straps need to lose 1/2 inch in length, and I might size in the body a bit more. I might also unstitch the pleats in the front (the back has 2" pleats, the front has 1" pleats)--in this pic it looks like I have a unaboob.

Tonight I'm going to the Mariners game, known around these parts as 3 solid hours of knitting time. So maybe I'll be ready to divide for the sleeves tomorrow.

I made a super yummy enchilada lassagne casserole thingy a couple nights ago. I intended to make enchiladas, but at the last minute, decided to instead do a lassagne-like thing.

Wow, I just realized while previewing this post that the color coordination in that there photo is something to marvel at! Green dutch oven, yellow tea kettle, red sauce pan; green pepper, yellow pepper, red pepper; Old El Paso can; green serano chilis, yellow corn, red tomato. I wish I could say that I planned that. Anyways... Ingredients: red, green and yellow bell pepper, sauteed until soft; canned green enchilada sauce; ~1 cup dry black beans, soaked over night then cooked 45 min; 1 serano chili (btw: I have become a PRO at cutting chilis without actually touching them with my fingers--it's all about the creative use of a fork, spoon and sharp knife); canned corn kernels; 2 diced roma tomatoes; corn tortillas; a little mozzarella and a little cheddar; crumbs from the bottom of my bag of blue corn tortilla chips for a little crunch on top (optional)

The result? Crazy delicious!

Oh, and in case you haven't had your daily fill of cute, I present my kitty:

Let's make something! Part 3--Increases

I said I would talk about increases, so let's do that now. Where the pattern says M1, I'm doing either a M1R or a M1L, which create right-slanting and left-slanting increases, respectively. I do M1R 1 stitch before the stitch marker that represents the raglan line, and M1L 1 stitchafter. The result:

An alternative to this method would to just pick up the bar between two stitches where it says M1 and knit this bar WITHOUT twisting. This would give more of an eyelet appearance, like you had made a super small yarn over on the previous row, which I considered, but decided to go with twisted paired increases instead. Info on increases.

Hopefully I'll ready to divide for the sleeves some day soon, and I'll talk about that next. :)

I cheated...

...on my knitting. And the result?

This quilt top. It's going to be a throw-size blanket. I'm planning on machine quilting, though not sure how yet. Probably a little in-the-ditch around the squares, something wave-like in the white spaces, and something TBD in the squares.

I needed a break from knitting on the featherweight cardigan. It's getting monotonous, but I feel like I still have to pay attention to the knitting because the stitches are so small, if I miss one, I'm not sure if I would notice it right away. And there's that pesky business of knitting across then purling back. I much prefer just knitting in the round.

I've done 20-some-odd increases so far. About half of the called for #, and with each increase round, there are 8 more stitches in a row, so it's gotten to the point where one row takes me a LONG time, and after a row or two, I'm bored and put it down. Hence the desire to cheat.

Let's make something! Part 2--The pesky issue of gauge

So, after I blabbed on about color choice for the featherweight cardigan, I went to the LYS and got some gorgeous blue yarn.


That's Malabrigo Merino Lace in Taureg, and goodness, it's gorgeous! And I think it will look good with my skin tone (as compared to a bright green). I finished up my Knitter's Mission with these simple wrist warmers

and set about starting this cardigan. And that's when I started butting my head against the wall we call gauge.

Oh, gauge. The bane of this knitter's existence. The pattern author got a gauge of 6 stitches and 9 rows per inch, on size 6 needles. Since I'm a loose knitter, I started my gauge swatch using a size 5 needle. And my gauge? 7 stitches and 10 rows per inch.

Grrrr! Since my 6 and 7 needles were in the other room, I went up size 8s and continued my gauge swatch. And with this needle, I got gauge. But the fabric looked awful--the top half of the gauge swatch.

So I went back to the 5s and swatched a bit more. Measured my gauge again and again, still 7 and 10 per inch. And decided that I would adapt the pattern to fit my gauge. So I did the math to change the numbers from a gauge of 6st/in to 7st/in. And I cast on.

I chose to use a cable cast on, my cast on method of choice. I like this cast on because it's quick and easy to work, doesn't involve 2 tails and is more sturdy than a simple knitted cast on. Worked back and forth, back and forth, back and forth. Sigh. And measured my gauge. 6st/in. Sigh.

Ugh. At this point, I could have continued knitting with my changed numbers of stitches--the beauty of top down reglan is that you can try it on as you go and stop increasing when it fits right. But instead, I chose to frog it, and start over, using size 5 needles and the numbers called for in the pattern.

Next time I'll talk a little bit about the increases used where it says M1 in this pattern. But for now, a pic of my new cat Butters when he discovered yarn.

Knitter's Mission, part 1--complete!

I cranked out this Second Shawlette in just about 2 days of devoted knitting. I'm pleasantly surprised with the results.

First of all, the yarn was wonderful to work with. And I don't think I've said it before, so I'll say it now: I am hopelessly devoted to the Addi Turbo Lace Needle. I wish ALL my needles had such pointy points--really makes things easier. So far I have sizes 1.5, 2.5 (x2--my most frequent sock needle size), 4 and 5. Someday I want to have one in every size. Anywayzzz.. back to the shawlette. The single skein of Dream in Color Smooshy has a pretty generous yardage, so I was able to get a good sized shawlette from it--though at the end I was consulting the scale after each row to determine how much I had left.

I would have liked to do a few more edge rows, but I'm still happy with how it came out. I ended up using the lace pattern from the Matilda Shawl for the lace portion of the shawl. I like the simplicity of it, and it was super easy to memorize, which is always convenient.

This shawl is basically a pretty scarf, just big enough to wrap around the neck. I kinda want to keep it--a sure sign that I'm pleased with the result. It's hard to tell in these pictures, but the color is just gorgeous--a deep purple with the slightest variation in tone.

Now I'm onto the second part of the Knitter's Mission: wrist warmers. These should be done in no time. :)